Charcuterie Serving Tray for Resin Art: A Unique Way to Serve Your Appetizers

Are you looking for a unique way to serve your appetizers that will leave your guests in awe? Look no further than a charcuterie serving tray for resin art. With its one-of-a-kind design, a resin art tray can elevate any party or gathering and turn your appetizers into a work of art.

What is Resin Art?

Resin art is a type of art where a clear resin is mixed with various pigments to create a unique and colorful design. The resin mixture is then poured onto a surface, such as a tray, and left to cure for several hours. The end result is a stunning, glossy surface that can be used for a variety of purposes, including serving food.

What is a Charcuterie Serving Tray?

A charcuterie serving tray is a wooden or bamboo board that is specifically designed for serving meats, cheeses, and other appetizers. It typically features a variety of sections and compartments to hold different types of food, as well as a handle for easy transport.

How to Make a Charcuterie Serving Tray with Resin Art

Making a charcuterie serving tray with resin art is a relatively simple process that can be completed in just a few hours. Here’s what you’ll need:

  • A wooden charcuterie board made from hardwood maple
  • Clear epoxy resin
  • Resin pigments in your desired colors
  • Mixing cups and sticks
  • A heat gun or torch
  • Protective gloves and goggles

Follow these steps to make your own charcuterie serving tray with resin art:

  1. Prepare Your Charcuterie Board: Before you begin, make sure your charcuterie board is clean and free of any debris. You can sand the surface lightly to create a smooth finish, but be careful not to remove too much wood.
  2. Mix Your Resin: Follow the instructions on your clear epoxy resin to mix the correct amount of resin and hardener. Once the two components are mixed together, stir for a few minutes until the mixture becomes clear.
  3. Add Your Pigments: Add a few drops of your resin pigments to the mixture and stir until the color is evenly distributed. You can add as many colors as you’d like, but be careful not to overdo it, as too many colors can make the design look cluttered.
  4. Pour the Resin: Slowly pour the resin mixture onto your charcuterie board, making sure to spread it evenly across the surface. You can use a mixing stick or a paintbrush to help spread the resin if necessary.
  5. Create Your Design: Using a heat gun or torch, gently move the resin mixture around to create a unique design. Be careful not to overheat the resin or burn the wood underneath. You can also use a toothpick or skewer to create patterns or swirls in the resin.
  6. Cure the Resin: Once you’re happy with your design, let the resin cure for the recommended amount of time. This can vary depending on the brand of resin you’re using, so be sure to check the instructions.
  7. Add Finishing Touches: Once the resin is cured, you can add any finishing touches, such as a food-safe sealant or a layer of clear resin on top to protect the design.


A charcuterie serving tray with resin art is a unique and beautiful way to serve your appetizers. With just a few simple steps, you can create a one-of-a-kind tray that will impress your guests and elevate your hosting game. So why not give it a try and see what kind of designs you can come up with?